SSANGYONG Y200
8. After installing, check leaking of water as following
procedure.
•
In order to fix glass of back door, in the right
position of installing, tape glass and frame of
door glass.
•
To keep sealant dry, wait for 24 hours.
•
Remove taping(a).
YAD9C2U0
•
After spread water on the door of tail gate, check
leaking of water. If leaking of water occur,
keeping door glass of tail gate dry, fill sealant
in the section of leaking. Leaking of water goes
on, remove door glass of tail gate, and then
proceed to repair above procedure.
•
Connect connector of heating line to the door
glass of tail gate.
•
Connect negative cable of battery.
YAD9C2V0
SUN ROOF
Removal and Installation
1. Remove headlining, room lamp, and sun visor.
2. Separate hose clip of drain hose of sun roof
(4 ea), pull hose slow, turning hoses to the left
direction and to the right direction slow.
YAD9C2W0
3. Remove the power connector in the relay box.
YAD9C2X0
BODY EXTERIOR 9C-53