Description And Operation; General - SSANGYONG Rexton Y200 Manual

7D-2 AUTOMATIC CONTROL HVAC SYSTEM

GENERAL

THE V5 FULL AUTOMATIC TEMPERATURE CONTROL
(FATC) SYSTEM
The full automatic temperature control (FATC) uses the
integrated control panel as the driver's interface to
the system. The FATC receives driver's input signal
and various input signal from sensors and controls the
a c t u a t o r s t o m a i n t a i n d r i v e r ' s d e s i r e d r o o m
temperature.
Refer to Section 7B, Manual Control Heating,
Ventilation, and Air Conditioning System for general
Information details for the following:
•
System Components – Functional.
•
The V5 A/C System.
•
V5 Compressor – Operation.
•
V5 Compressor – General Description.

DESCRIPTION AND OPERATION

Vacuum Fluorescent Display panel provides system
operating information for the driver. With the system
in OFF mode, the outside temperature is displayed
continuously.
The driver may display the current temperature setting
by selecting any mode except OFF or adjusting the
temperature control.
Also, it provides the convenience to the driver by
indicating the ambient air temperature. If it occurs the
faulty in the FATC system, the MICOM informs the driver
or mechanics of the results of the self-diagnostic check
and controls the system by
SSANGYONG Y200