SSANGYONG Rexton Y200 Manual page 1480

SSANGYONG Y200
2) Install the shock absorber.
YAD9C150
Adjusting Hood Hinge
1. Release little bit fixing bolt of hood hinge.
2. After adjusting hood hinge to forward and
backward, left and right, check whether right
position of hood is installed or not.
YAD9C160
3. After adjusting over slam bumper, adjust height
of front end of hood.
YAD9C170
Adjusting Hood Latch
1. Install hood latch on the right position, if hood latch
is not installed on the right position, while hood is
installed, hood may distort and be unbalanced.
Bolt of Hood Latch
YAD9C180
BODY EXTERIOR 9C-11
8 - 11 N•m
(44 - 52 lb-ft)