Maintenance And Repair; On-Vehicle Service; Airbag Module (Driver) - SSANGYONG Rexton Y200 Manual

8B-16 RESTRAINTS

MAINTENANCE AND REPAIR

YAD8B110
YAD8B120
YAD8B130

ON-VEHICLE SERVICE

AIRBAG MODULE (DRIVER)

Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. Place the steering wheel at the straight driving
direction.
3. Remove the screw of the airbag module.
4. Disconnect the airbag module connector, the horn
connector and then remove the airbag module.
5. Verify to tighten all of the module and each
connector.
Installation should follow the removal procedure
in the reverse order.
SSANGYONG Y200