SSANGYONG Rexton Y200 Manual page 1479

9C-10 BODY EXTERIOR
6. Remove hood latch and cable.
1) Remove cable and hood latch lever in the lower
main panel.
YAD9C110
2) Push cable removed through groove of body
into direction of engine room.
3) After releasing fixing bolt of hood latch, remove
latch and cable.
YAD9C120
4) Remove cable of hood latch.
YAD9C130
7. Install the reverse order of removal .
1) After installing hood hinge into body and hood,
tighten fixing bolt
specification.
Tightening Torque
YAD9C140
with the torque of
29 - 39 N•m
(21 - 29 lb-ft)
SSANGYONG Y200