Front Quarter Glass - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200
7. For the right position installed of glass which wind
shield is fixed, stick tape on moulding, and frame
of wind shield.
8. To keep sealant dry, park the vehicle for 24 hours.
9. Remove tape1.
YAD9C1W0
10. Spread water on the wind shield glass, and then
check leaking of water. If leaking of water happen,
after keep wind shield glass dry, fill sealant on
the section of leaking, if leaking of water goes on,
wind shield glass is removed, the above
descriptive work proceed to repair once again.
YAD9C1X0

FRONT QUARTER GLASS

Removal
1. After releasing fixing nut of quarter glass, remove
cover of glass moulding.
2. After removing quarter glass, using knife, remove
sealant of quarter and frame.
YAD9C1Y0
BODY EXTERIOR 9C-45