SSANGYONG Y200
REAR BUMPER ASSEMBLY
Facia
1. Remove rear combi - lamp.
2. Separate screw of section of combi - lamp.
(left: 1 ea, right: 2 ea)
3. Separate screw of the upper of the bumper.
(left: 1 ea, right: 1 ea)
YAD9C380
4. Separate rivet of the upper of bumper facia.
(5 ea)
5. Separate fixing screw of bumper facia in the rear
wheel house. (left: 4 ea, right: 4 ea)
6. Install reverse order of removal.
YAD9C390
YAD9C380
BACK BEAM
1. After releasing fixing bolt of rear bumper, remove
back beam assembly.
2. Install reverse order of removal.
Tightening Torque
YAD9C400
BODY EXTERIOR 9C-17
41.6 - 62.4 N•m
(44 - 52 lb-ft)