Front Airbag - SSANGYONG Rexton Y200 Manual

FRONT AIRBAG

General Description
•
The frontal airbag system is a safety device used
in conjunction with the seat belts.
The airbag does not replace the function of the seat
belt. The driver and the passengers must always
fasten their seat belts and adjust them for a proper
fit.
The front seat airbag is designed to protect the driver
and the front seat passenger in the event of a
significant frontal impact to the vehicle.
•
The driver airbag is installed on the steering wheel
and the passenger airbag is in the instrument panel.
Airbag Component
Cover
It is a part of the airbag steering section and is made
by injection molding.
Door Assembly
It is a part of the airbag steering and is made by
vacuum bubble, PSM, injection.
SSANGYONG Y200
Cushion
•
Cushion is made mainly of nylon 66 material.
•
It is made by assembling various panel pieces and
sometimes, some surfaces of these panel pieces
handled by coating. The coating material is used
as silicon rubber generally.
Inflator
•
The inflator generates gas to fill the cushion with it.
There are two type of ALL-PYRO TECHNIC TYPE
and HYBRID TYPE according to gas generated type.
•
Now, the driver airbag uses the "all-pyro technic
type" and the passenger airbag uses both "all-pyro
technic type" and "hybrid type".
•
The inflator has the ignitor at one side of the inflator.
The ignitor receives a electrical signal from the
sensor and ignites powders continuously.
Housing
It is a part of airbag steel plate structure.
RESTRAINTS 8B-7