SSANGYONG Rexton Y200 Manual page 1564

9D-36 BODY ELECTRICAL
Side lamp
1. After pushing side lamp to front side, pulling rear
of lamp, and then remove side lamp.
2. After removing the connector, remove side lamp.
YAD9D670
High mounted lamp
1. Remove spoiler from the tail gate.
YAD9D680
2. After separating fixing screw (2 ea) of lamp spoiler
of tail gate, and then remove connector.
3. Remove lamp assembly.
4. Install the reverse order of removal.
YAD9D690
Lamp of glove box
1. Open up cover of glove box.
2. After pushing lamp as indicated mark, remove
lamp of glove box.
3. After separating connector of lamp, remove lamp.
4. Install the reverse order of removal.
YAD9D700
SSANGYONG Y200