SSANGYONG Rexton Y200 Manual page 1570

9D-42 BODY ELECTRICAL
Power antenna and module
Power antenna
1. After separating the negative terminal, remove
lower quarter panel of seat in the passenger seat.
2. Remove fixing cover of power antenna.
YAD9D870
3. After separating motor connector of power
antenna, and then release fixing nut of motor.
4. Remove power antenna assembly.
YAD9D880
Module of glass antenna
1. Remove the upper quarter panel.
2. Remove module of glass antenna.
•
Separate connector of glass antenna.
•
Separate jack of antenna.
•
Release bolt (2ea).
•
Separate connector of rear heating line.
•
Remove module of glass antenna.
YAD9D890
3. Install the reverse order of removal.
YAD9D900
SSANGYONG Y200