Show Ip Igmp Interface - Dell Force10 Z9000 Reference Manual

Example (VLT)
FTOS#show ip igmp groups
Total Number of Groups: 5
IGMP Connected Group Membership
Group Address Interface Mode Uptime Expires Last Reporter
225.0.0.0
Member Ports: Po 2*
225.0.0.1
Member Ports: Po 2*
225.0.0.2
Member Ports: Po 2*
225.0.0.3
Member Ports: Po 2*
225.0.0.4
Member Ports: Po 2*

show ip igmp interface

View information on the interfaces participating in IGMP.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip igmp interface [interface]
Parameters
interface
678
NOTE: The asterisk (*) after the port channel number (Po 2) highlighted in the Example
below indicates the port channel is VLT, that the local VLT port channel is down and the
remote VLT port is up.
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
(OPTIONAL) Enter the interface type and slot/port information:
•
•
•
•
•
•
•
•
For a 100/1000 Ethernet interface, enter the keyword
gigabitethernet followed by the slot/port information.
For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet followed by the slot/port information.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
For a Loopback interface, enter the keyword loopback
followed by a number from 0 to 16383.
For a SONET interface, enter the keyword sonet followed by
the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
For a VLAN interface enter the keyword vlan followed by a
number from 1 to 4094.