NOTE:
When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.
• COPIER > COUNTER > DRBL-1 > SP-SC-EL
Removing the Waste Toner Container
■ Procedure
1. Open the Front Cover.
2. Turn the Lock Lever [1] in the direction of the arrow, and remove the Waste Toner Container [2].
3. Attach the accompanying cap [2] to the opening of the Waste Toner Container [1] to prevent leakage of the content.
NOTE:
When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.
• COPIER > COUNTER > DRBL-1 > WST-TNR
1x
[1]
[2]
258
4. Disassembly/Assembly
[2]
[1]
[2]