Removing The Rear Cover Unit / Duplex Feed Unit - Canon LBP6670dn Series Service Manual

3
Disassembly/Assembly > External Cover, Internal Cover > Removing the Rear Cover Unit / Duplex Feed Unit

Removing the Rear Cover Unit / Duplex Feed Unit

Preparations
1) Remove Right Cover.(Refer to page 3-9)
2) Remove Left Cover.(Refer to page 3-9)
Procedure
1) Lift Lever [1] and move Duplex Feed Unit [2] downwards.
[1]
CAUTION:
During reassembly, 2 raise Lever of Duplex Feed Unit and attach Duplex Feed Unit to
Main Unit by using 2 magnet on each side.
2) Open Rear Cover [1].
3) Remove Rear Cover Unit [2] together with Duplex Feed Unit.
• 5 Screw [3]
[1]
x5
[3]
[2]
3 Disassembly/Assembly > External Cover, Internal Cover > Removing the Rear Cover Unit / Duplex Feed Unit
[2]
[3]
[3]
4) Remove Rear Cover Unit [1] together with Duplex Feed Unit [2].
• 2 Boss [3]
[1]
[3]
Procedure at installation:
1) Fit the 2 Upper Claw [2] of the Rear Cover Unit [1] With the Upper Cover.
2) Open the Rear Uppe Cover [3] and While Pushing the Duplex Reverse Sensor Flag [4]
Downward, Install the Rear Cover Unit.
[4]
[4]
[5]
3-10
[3]
[2]
[2]
[1]
[3]
3-10