Fujitsu MB96300 series Hardware Manual page 6

F2mc-16fx 16-bit
Hide thumbs Also See for MB96300 series:
Table of Contents

Advertisement

CHAPTER 9 "STANDBY MODE AND VOLTAGE REGULATOR CONTROL CIRCUIT"
This chapter explains the functions and operations of the standby mode control circuit and the
CHAPTER 10 "SOURCE CLOCK TIMERS"
This chapter explains the functions and operations of the three source clock timers (RC clock
CHAPTER 11 "WATCHDOG TIMER AND WATCHDOG RESET"
This chapter explains the functions and operations of the Watchdog timer and reset.
CHAPTER 12 "EXTERNAL BUS INTERFACE"
This chapter explains the functions and operations of the external bus interface.
CHAPTER 13 "I/O PORTS"
This chapter explains the functions and operations of the I/O ports.
CHAPTER 14 "16-BIT I/O TIMER"
This chapter explains the functions and operations of the 16-bit I/O Timer.
CHAPTER 15 "16-BIT RELOAD TIMER (WITH EVENT COUNT FUNCTION)"
This chapter explains the functions and operations of the 16-bit Reload Timer (with the Event
CHAPTER 16 "PROGRAMMABLE PULSE GENERATOR"
This chapter explains the functions and operations of the Programmable Pulse Generator.
CHAPTER 17 "EXTERNAL INTERRUPTS"
This chapter explains the functions and operations of the External Interrupts.
CHAPTER 18 "A/D CONVERTER"
This chapter explains the function and operation of the A/D converter.
CHAPTER 19 "ALARM COMPARATOR"
This chapter explains the functions and operations of the Alarm Comparator.
CHAPTER 20 "USART"
This chapter explains the functions and operation of the LIN USART.
CHAPTER 21 "400 kHz I2C INTERFACE"
This section describes the functions and operation of the fast I2C interface.
CHAPTER 22 "CAN CONTROLLER"
This chapter explains the functions and operations of the CAN controller.
CHAPTER 23 "CLOCK OUTPUT FUNCTION"
This chapter describes the functions and operations of the clock output function.
CHAPTER 24 "REAL TIME CLOCK"
This chapter explains the functions and operations of the Real Time Clock.
ii
control of the internal voltage regulator. The regulator control can be used to optimize
power consumption, especially in standby modes.
timer, Main clock timer and Sub clock timer).
Count Function).
MB96300 Super Series Hardware Manual

Advertisement

Table of Contents
loading

Table of Contents