Fujitsu MB96300 series Hardware Manual page 217

F2mc-16fx 16-bit

Hide thumbs Also See for MB96300 series:

Table of Contents

MB96300 Super Series Hardware Manual

Reset Conﬁguration Register (RCR)

The Reset Conﬁguration Register (RCR) is used to assert a Software reset, conﬁgure the

low voltage reset and detector and to conﬁgure the Clock stop detection circuit.

■ Conﬁguration of the Reset Conﬁguration Register (RCR)

Figure 8.5-2 shows the configuration of the Reset Configuration Register (RCR) and Table 8.5-1 describes

the function of each bit.

CHAPTER 8 RESETS AND STARTUP