Access Endpoint - Avaya Communication Manager Administrator's Manual

DIAL CODE
Enter the number you want to assign to each dial code (button). Any additions or changes apply to all
7103A fixed feature phones. While the system is waiting, a call progress tone receiver is tied up, and,
since there are a limited number of receivers in the system, outgoing calling capability may be impaired.
Vector Directory Number extension may also be assigned.
Valid entries
Digits 0 to 9
* (star)
# (pound)
~p
~w
~m
~s
~W

Access Endpoint

This screen administers Access Endpoints and Wideband Access endpoints.
NOTE:
You can administer Wideband Access Endpoints only if, on the System-Parameters
Customer-Options screen, the
An Access Endpoint is a nonsignaling trunk that neither responds to signaling nor generates signaling.
Access Endpoints eliminate the need to dedicate an entire trunk group for the access of a single trunk by
providing the capability to assign an extension number to a single trunk.
An Access Endpoint can be specified as the Originator or Destination endpoint of an administered
connection.
A Wideband Access Endpoint (WAE) is an endpoint application connected to line-side non-ISDN T1 or
E1 facilities and, like Access Endpoints, have no signaling interface with the system. For information on
endpoint applications connected to line-side ISDN-PRI facilities, see
The WAE is defined by a starting port (DS0) and a width specifying the number of adjacent nonsignaling
DS0s (positioned within a DS1 facility) that make up the endpoint. This width may be between 2 and 31
adjacent DS0s.
NOTE:
Access Endpoints and Wideband Access Endpoints consume the same resources that
trunks use. Thus, the sum of Access Endpoints and trunks cannot exceed the maximum
number of trunks available in your system configuration.
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Up to 24 characters
Part of FAC
Part of FAC
Pause 1.5 seconds
Wait for dial tone
Mark
Start suppressing display of the digits being outpulsed
Wait indefinitely for dial tone. Use this only if network response
time is more than 30 seconds. Not available for S8300 Media
Server.
Wideband Switching
Screen Reference
Access Endpoint
field is y.
PRI Endpoint on page 1109.
619