Avaya Communication Manager Administrator's Manual page 606

Screen Reference
AAR and ARS Digit Analysis Table
Location (for the ARS Digit Analysis Table)
This is a display-only field on the ARS Digit Analysis Table screen.
Valid
display
1 to 64
all
Max
Valid entries
Between Min and 28
Min
Valid entries
Between 1 and Max
Node Number
Valid entries
1 to 999 or blank
Percent Full
Displays the percentage (0 to 100) of the system's memory resources that have been used by AAR/ARS.
If the figure is close to 100%, you can free up memory resources.
606
Usage
Defines the location of the server running Avaya Communication
Manager that uses this ARS Digit Analysis Table. On the
System-Parameters Customer-Options
field must be set to y for values other than all to
Multiple Locations
appear.
Indicates that this ARS Digit Analysis Table is the default for all port
network (cabinet) locations. Appears only if the
field is n on the System-Parameters Customer-Options
Usage
Enter the maximum number of user-dialed digits the system
collects to match to the dialed string.
Usage
Enter the minimum number of user-dialed digits the system
collects to match to the dialed string.
Usage
Enter the number of the destination node in a private network
if you are using node number routing or DCS. If you complete
this field, leave the
Administrator's Guide for Avaya Communication Manager
screen, the
ARS
Multiple Locations
Route Index field blank.
field and the
screen.
November 2003