Camera Interface; Overview Of Camera Interface - Samsung S5PC110 Manual

S5PC110_UM
2

CAMERA INTERFACE

2.1 OVERVIEW OF CAMERA INTERFACE

The camera interface (CAMIF) in S5PC110 is a fully interactive mobile camera interface. CAMIF supports ITU R
BT-601/656 standard, AXI interface, and MIPI (CSI). The maximum input image size of CAMIF is 8192 x 8192
pixels.
S5PC110 has three CAMIF units, namely, CAMIF0, CAMIF1, and CAMIF2, as shown in
Each of these units is designed to perform different functions, as shown in
•
T_PatternMux generates test pattern to calibrate input sync signals as HREF and VSYNC.
•
Capture specifies the capturing signal and window cut. Use the register settings to invert video sync signals
and pixel clock polarity in CAMIF.
•
Scaler generates various sizes for an image.
•
Input DMA (read only) reads from the memory image data.
•
Output DMA (write only) writes image data to memory.
•
CAMIF supports image rotation (90 degrees clockwise) and image effect functions.
2 1BCAMERA INTERFACE
Figure 2-1.
Figure 2-2.
2-1