Clear Ip Bgp Peer-Group; Debug Ip Bgp - Dell Force10 S4810P Reference Manual

clear ip bgp peer-group

Reset a peer-group's BGP sessions.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear ip bgp peer-group peer-group-name
Parameters
peer-group-name
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0

debug ip bgp

Display all information on BGP, including BGP events, keepalives, notifications, and updates.
C-Series, E-Series, S-Series, Z-Series
Syntax debug ip bgp [ip-address | peer-group peer-group-name] [in |
out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
ip-address
peer-group
group-name
in
out
A.B.C.D
X:X:X:X::X
dampening
events
ipv4
ipv6
keepalives
Enter the peer group name to reset the BGP sessions within that peer
group.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the IP address of the neighbor in dotted decimal format.
peer-
Enter the keywords peer-group followed by the name of the peer
group to debug.
(OPTIONAL) Enter the keyword in to view only information on
inbound BGP routes.
(OPTIONAL) Enter the keyword out to view only information on
outbound BGP routes.
Enter the IP address of peer in the A.B.C.D format.
Enter the IPv6 IP address of peer in the X:X:X:X::X format.
Enter the keyword dampening to view BGP dampening.
Enter the keyword events to view BGP protocol events.
Enter the ipv4 IP address to view the IPV4 route information.
Enter the ipv6 IP address to view the IPV6 route information.
Enter the keyword keepalives to view BGP keepalives.
373