Clear Ip Bgp Peer-Group - Dell S6000 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage If you enter the clear ip bgp flap-statistics command without any
Information
parameters, all statistics are cleared.
Related
show debugging
Commands
show ip bgp flap-statistics
undebug all

clear ip bgp peer-group

Reset a peer-group's BGP sessions.
S6000
Syntax
clear ip bgp [vrf vrf-name] peer-group peer-group-name
Parameters
vrf vrf-name
peer-group-
name
Command EXEC Privilege
Modes
350
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— views the enabled debugging operations.
— views the BGP flap statistics.
— disables all debugging operations.
Enter the keyword vrf and then the name of the VRF to
reset the peer group corresponding to that VRF.
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
Enter the peer group name to reset the BGP sessions within
that peer group.
Border Gateway Protocol