Show Cam-Acl-Vlan - Dell Z9500 Reference Manual

Egress IP Acl :
Vlan Members :

show cam-acl-vlan

Display the number of FP blocks of CAM that are allocated for different ACL VLAN services, including ACL
VLAN optimization, VLAN iSCSI counters, and Open Flow.
Syntax
show cam-acl-vlan
Command EXEC Privilege
Modes
Command
Version
History
9.5(0.0)
9.3(0.0)
Usage After you allocate FP blocks of CAM to ACL VLAN operation, you must reboot the
Information switch to enable ACL VLAN optimization.
The following table describes the output fields of the show cam-acl-vlan
command:
Field
Chassis Vlan Cam ACL
Stack Unit <number>
Current Settings(in block sizes)
VlanOpenFlow
VlanIscsi
VlanHp
VlanFcoe
Access Control Lists (ACL)
Group5
1,1000
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, Z9000 and MXL.
Description
Details about the CAM blocks allocated
for ACLs for various VLAN operations at
a system-wide, global level.
Details about the CAM blocks allocated
for ACLs for various VLAN operations
for a particular stack unit.
Information about the number of FP
blocks that are currently in use or
allocated.
Number of FP blocks for VLAN open
flow operations.
Number of FP blocks for VLAN internet
small computer system interface
(iSCSI) counters.
Number of FP blocks for VLAN high
performance processes.
Number of FP blocks for VLAN Fiber
Channel over Ethernet (FCoE)
operations.
257