Show Cam-Acl-Vlan - Dell C9000 Series Reference Manual

show cam-acl-vlan

Display the number of FP blocks of CAM that are allocated for different ACL VLAN services, including ACL
VLAN optimization, VLAN iSCSI counters, and Open Flow.
C9000 Series
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
9.5(0.0)
9.3(0.0)
Usage Information After you allocate FP blocks of CAM to ACL VLAN operation, you must reboot the
switch to enable ACL VLAN optimization.
The following table describes the output fields of the show cam-acl-vlan command:
Table 1. show cam-acl-vlan Command Description
Field
Chassis Vlan Cam ACL
Stack Unit <number>
Current Settings(in block sizes)
VlanOpenFlow
VlanIscsi
VlanHp
VlanFcoe
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4810, S4820T, Z9000 and MXL.
Description
Details about the CAM blocks allocated
for ACLs for various VLAN operations at a
system-wide, global level.
Details about the CAM blocks allocated
for ACLs for various VLAN operations for
a particular stack unit.
Information about the number of FP
blocks that are currently in use or
allocated.
Number of FP blocks for VLAN open flow
operations.
Number of FP blocks for VLAN internet
small computer system interface (iSCSI)
counters.
Number of FP blocks for VLAN high
performance processes.
Number of FP blocks for VLAN Fiber
Channel over Ethernet (FCoE) operations.
Access Control Lists (ACL) 326