Ipv6 Prefix-List - Dell S4810 Reference Manual

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.4.1.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.2.1.0
Usage
This command turns on BGP soft-reconfiguration inbound debugging for IPv6
Information
unicast routes. If no neighbor is specified, debug is turned on for all neighbors.

ipv6 prefix-list

Configure an IPv6 prefix list.
S4810
Syntax
ipv6 prefix-list prefix-list name
Parameters
prefix-list name
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant FTOS Command Line Reference Guide.
The following is a list of the FTOS version history for this command.
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.10.0
Border Gateway Protocol
Introduced on the S4820T.
Added support for IPv4 multicast and IPv6 unicast routes.
Introduced on the S4810.
Introduced on the C-Series.
Introduced on the E-Series TeraScale.
Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list
names.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
493