Show Ip Bgp Paths Extcommunity - Dell S4810 Reference Manual

Defaults none
Command ROUTE MAP (config-route-map)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
Usage
If the set community rt and soo are in the same route-map entry, the behavior
Information
defines as:
•
•
•
Related set extcommunity rt
Commands map.

show ip bgp paths extcommunity

To display all BGP paths having extended community attributes, use this feature.
S4810
Syntax
show ip bgp paths extcommunity
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Border Gateway Protocol
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
If the rt option comes before soo, with or without the additive option, soo
overrides the communities rt sets.
If the rt option comes after soo, without the additive option, rt overrides
the communities soo sets.
If the rt with the additive option comes after soo, rt adds the communities
soo sets.
— sets the extended community route origins using the route-
EXEC
EXEC Privilege
Introduced on the S6000.
489