Test Cam-Usage - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

-- stack-unit 0 --

test cam-usage

Verify that enough CAM space is available for the IPv6 ACLs you have created.

test cam-usage service-policy input input policy name linecard

{number | all}

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Current Settings(in block sizes)

1 block = 128 entries

Enter the name of the policy-map to verify. Maximum is 32

Enter all to get information for all the linecards/stack-units

or enter the linecard/ stack-unit number to get information

for a specific card. The range is : 0-11 for S4810; 0-7 for all

other S-Series

Introduced on the S6000.

Content Addressable Memory (CAM)