Control Plane Policing (Copp); Control-Plane-Cpuqos; Service-Policy Rate-Limit-Cpu-Queues - Dell S4810 Reference Manual

Control Plane Policing (CoPP)

The CoPP commands are supported on the Dell Networking S4810 platform.

control-plane-cpuqos

To manage control-plane traffic, enter control-plane mode and configure the switch.
S4810
Syntax
control-plane-cpuqos
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0

service-policy rate-limit-cpu-queues

Apply a policy map for the system to rate limit control traffic on a per-queue basis.
S4810
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name
Control Plane Policing (CoPP)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Enter the service-policy name, using a string up to 32
characters.
12
507