Distribute-List Out - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 7.5.1.0

Version 6.3.1.0

distribute-list out

Suppress network prefixes from being advertised in outbound updates.

distribute-list prefix-list-name out [connected | bgp as number

| ospf process-id | rip | static]

For a 1- Gigabit Ethernet interface, enter the keyword

GigabitEthernet then the slot/port information.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a SONET interface, enter the keyword sonet then the

slot/port information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a VLAN, enter the keyword vlan then a number from

ROUTER ISIS (for IPv4)

CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Added IPv6 ISIS support.

distribute-list out

— suppresses networks from being advertised in updates.

redistribute

— redistributes routes from one routing domain to another routing

Intermediate System to Intermediate System (IS-IS)