Show Ip Bgp Next-Hop - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

Local host: 172.16.0.1, Local port: 58145

Foreign host: 172.16.0.2, Foreign port: 179

show ip bgp next-hop

View all next hops (using learned routes only) with current reachability and flap status. This command

only displays one path, even if the next hop is reachable by multiple paths.

show ip bgp [vrf vrf-name] next-hop

vrf vrf-name

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.4.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Border Gateway Protocol

CISCO_ROUTE_REFRESH(128)

For address family: IPv4 Unicast

BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0

InQ : Added 0, Replaced 0, Withdrawn 0

OutQ : Added 0, Withdrawn 0

Allow local AS number 0 times in AS-PATH attribute

Prefixes accepted 2, withdrawn 15 by peer, martian prefixes

Prefixes advertised 0, denied 0, withdrawn 0 from peer

Connections established 1; dropped 0

Last reset never

— views the current BGP routing table.

Enter the keyword vrf followed by the name of the VRF to

view all next hops corresponding to that VRF.

EXEC Privilege

Added support for VRF.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.