Ipv6 Mbgp Commands; Show Ipv6 Mbgproutes - Dell S4810 Reference Manual

Parameters
detail
prefix-list name
summary
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant FTOS Command Line Reference Guide.
The following is a list of the FTOS version history for this command.
Version 9.0.0.0
Version
8.3.10.0
Related ipv6 prefix-list
Commands

IPv6 MBGP Commands

Multiprotocol BGP (MBGP) is an enhanced BGP that enables the multicast routing policy throughout the
internet and connecting multicast topologies between BGP and autonomous systems (AS). FTOS MBGP is
implemented as per IETF RFC 1858.

show ipv6 mbgproutes

Display the selected IPv6 MBGP route or a summary of all MBGP routes in the table.
S4810
Syntax
show ipv6 mbgproutes ipv6-address prefix-length | summary
Parameters
ipv6-address
prefix-length
summary
Border Gateway Protocol
Display a detailed description of the selected IPv6 prefix list.
Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list
names.
Display a summary of RPF routes.
Introduced on the Z9000.
Introduced on the S4810.
— configures an IPv6 prefix-list.
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is from /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Display a summary of RPF routes.
495