Neighbor Password - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.8.1.0

Version 7.7.1.0

If you configure the neighbor maximum-prefix command and the neighbor

receives more prefixes than the neighbor maximum-prefix command

configuration allows, the neighbor goes down and the show ip bgp summary

command displays (prfxd) in the State/PfxRcd column for that neighbor. The

neighbor remains down until you enter the clear ip bgp command for the

neighbor or the peer group to which the neighbor belongs or you enter the

neighbor shutdown and neighbor no shutdown commands.

show ip bgp summary

neighbor password

Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.

neighbor {ip-address | peer-group-name} password [encryption-

type] password

To delete a password, use the no neighbor {ip-address | peer-group-

name} password command.

Not configured.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

— displays the current BGP configuration.

Enter the IP address of the router to be included in the peer

Enter the name of a configured peer group.

(OPTIONAL) Enter 7 as the encryption type for the password

entered. 7 means that the password is encrypted and hidden.

Enter a text string up to 80 characters long. The first

character of the password must be a letter.

You cannot use spaces in the password.

Border Gateway Protocol