Bgp Graceful-Restart - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

Disabled (supports 2–byte format)

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.8.1.0

Version 7.7.1.0

Routers supporting 4-byte ASNs advertise that function in the OPEN message. The

behavior of a 4-byte router is slightly different depending on whether it is speaking

to a 2-byte router or a 4-byte router.

When creating Confederations, all the routers in the Confederation must be 4 byte

or 2 byte identified routers. You cannot mix them.

Where the 2-byte format is from 1 to 65535, the 4-byte format is from 1 to

4294967295. Both formats are accepted and the advertisements reflect the

entered format.

For more information about using the 2 byte or 4-byte format, refer to the Dell

Networking OS Configuration Guide.

This command automatically restarts the BGP instance for the configuration to

take effect.

bgp graceful-restart

To support graceful restart as a receiver only, enable graceful restart on a BGP neighbor, a BGP node, or

designate a local router.

bgp graceful-restart [restart-time seconds] [stale-path-time

seconds] [role receiver-only]

To return to the default, use the no bgp graceful-restart command.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Border Gateway Protocol