Clear Ip Bgp Dampening - Dell S4810 Reference Manual

dampening
flap-statistics
ipv4
ipv6
peer-group
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 6.5.1.0
Related
bgp recursive-bgp-next-hop
Commands
learned by the BGP.

clear ip bgp dampening

Clear information on route dampening and return the suppressed route to the Active state.
S4810
Syntax
clear ip bgp [vrf vrf-name] dampening [ip-address mask]
Parameters
vrf vrf-name
Border Gateway Protocol
Enter the keyword dampening to clear the flap dampening
information.
Enter the keywords flap-statistics to clear the flap
statistics information.
Enter the ipv4 address family to clear.
Enter the ipv6 address family to clear.
Enter the peer-group to clear all members of the peer-
group.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Expanded to include the as-number option.
— disables next-hop resolution through other routes
(OPTIONAL) Enter the keyword vrf and then the name of
the VRF to clear information on route dampening
corresponding to that VRF
399