Show Ip Cam Linecard - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

Name servers are not set

-------- -----

show ip cam linecard

View CAM entries for a port pipe on a line card.

C-Series, E-Series, S4810

show ip cam linecard number port-set pipe-number [ip-address

mask [longer-prefixes] | index index-number | summary | vrf vrf

ip-address mask

[longer-prefix]

vrf instance

Command Modes

Command History

Version 8.3.7.0

Version 8.1.1.2

Version 8.1.1.0

(perm, OK) -

– views the DNS resolution.

– configures a host.

Enter the number of the line card. The range is 0 to 13 on a

E1200/1200i, 0 to 6 on a E600600i, and 0 to 5 on a E300.

Enter the number of the line card's port-pipe. The range is 0 to 1.

(OPTIONAL) Enter the IP address and mask of a route to CAM entries

for that route only. Enter the keyword longer-prefixes to view

routes with a common prefix.

(OPTIONAL) Enter the keyword index followed by the CAM index

number. The range depends on CAM size.

(OPTIONAL) Enter the keyword summary to view a table listing route

prefixes and the total number of routes that can be entered into the

(OPTIONAL) E-Series Only: Enter the keyword vrf followed by the

VRF instance name to show CAM information as it applies to that VRF

EXEC Privilege

Introduced on the S4810.

Introduced on the E-Series ExaScale E600i.

Introduced on the E-Series ExaScale.