Description - Dell S4810 Reference Manual

description

Enter a description of the BGP routing protocol
S4810
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
pre-7.7.1.0
Related
router bgp
Commands
max-paths
Configure the maximum number of parallel routes (multipath support) BGP supports.
S4810
Syntax
max-paths {ebgp | ibgp} number
To return to the default values, enter the no maximum-paths command.
Parameters
ebgp
Border Gateway Protocol
Enter a description to identify the BGP protocol (80
characters maximum).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— enters ROUTER mode on the switch.
Enter the keyword ebgp to enable multipath support for
External BGP routes.
411