Bgp Bestpath As-Path Ignore - Dell S4810 Reference Manual

router bgp 1
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asplain
Dell(conf-router_bgp)#ex
Dell(conf)#do show run |grep bgp
router bgp 1
Dell(conf)#
Related bgp four-octet-as-support
Commands

bgp bestpath as-path ignore

Ignore the AS PATH in BGP best path calculations.
S4810
Syntax
bgp bestpath as-path ignore
To return to the default, enter the no bgp bestpath as-path ignore
command.
Defaults Disabled (that is, the software considers the AS_PATH when choosing a route as
best).
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage If you enable this command, use the clear ip bgp * command to recompute
Information the best path.
Border Gateway Protocol
bgp four-octet-as-support
bgp asnotation asdot+
bgp four-octet-as-support
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— enables 4-byte support for the BGP process.
379