Input And Output Connectors; Removal - Agilent Technologies N9039A Service Manual

Input and Output Connectors

Removal

1. Remove the instrument outer case. Refer to the
procedure.
2. Remove the Front Frame Assembly. Refer to the
removal procedure.
3. Refer to
are going to remove.
Figure 7-27 Connector Assembly Removal
4. Remove the two screws (1) that attach the connector assembly to the chassis.
The connector assembly can now be lifted from the chassis.
Chapter 7
Figure 7-27. Disconnect the semi-rigid cable from the connector you
Assembly Replacement Procedures

Input and Output Connectors

Instrument Outer Case removal
Front Frame Assembly
203