Neighbor Default-Originate; Neighbor Description - Dell Force10 Z9000 Reference Manual

Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Related bgp four-octet-as-support
Commands

neighbor default-originate

Inject the default route to a BGP peer or neighbor.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor {ip-address | peer-group-name} default-originate
[route-map map-name]
To remove a default route, use the no neighbor {ip-address | peer-group-
name} default-originate command.
Parameters
ip-address
peer-group-name
route-map
name
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage If you apply a route map to a BGP peer or neighbor with the neighbor default-
Information
originate command configured, the software does not apply the set filters in the route map
to that BGP peer or neighbor.

neighbor description

Assign a character string describing the neighbor or group of neighbors (peer group).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor {ip-address | peer-group-name} description text
362
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
– enables 4-byte support for the BGP process.
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group to set the default route of all routers
in that peer group.
map-
(OPTIONAL) Enter the keyword route-map followed by the name of
a configured route map.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.