Show Queue Backplane Multicast - Dell Force10 Z9000 Reference Manual

show ip rpf
View reverse path forwarding.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip rpf
Command Modes
Command History
Version 8.3.7.0
E-Series legacy
command
Usage Static mroutes are used by network administrators to control the reach-ability of the multicast
Information sources. If a PIM-registered multicast source is reachable using static mroute as well as
unicast route, the distance of each route is examined and the route with shorter distance is the
one the PIM selects for reach-ability.
Example
FTOS#show ip rpf
RPF information for 10.10.10.9

show queue backplane multicast

Display the backplane bandwidth configuration about how much bandwidth is dedicated to multicast versus unicast.
E-Series
Syntax show queue backplane multicast bandwidth-percentage
Defaults none
Command Modes
Command History
Version 7.7.1.0
1018
• EXEC
• EXEC Privilege
Introduced on the S4810.
NOTE: The default distance of mroutes is zero (0) and is CLI configurable on a per route
basis.
RPF interface: Gi 3/4
RPF neighbor: 165.87.31.4
RPF route/mask: 10.10.10.9/255.255.255.255
RPF type: unicast
• EXEC
• EXEC Privilege
Introduced on the E-Series.