Dell Force10 Z9000 Reference Manual page 810

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

The following describes the show ip cam summary command shown in the Example

Prefix Length

Initial Size

FTOS#show ip cam linecard 4 port-set 0 summary

Total Number of Routes in the CAM is 13

Total Number of Routes which can be entered in CAM is 131072

Prefix Len Current Use Initial Sz

---------- ----------- ----------

Displays the prefix-length or mask for the IP address configured on

the linecard 0 port pipe 0.

Displays the number of routes currently configured for the

corresponding prefix or mask on the linecard 0 port pipe 0.

Displays the CAM size allocated by FTOS for the corresponding

mask. The CAM size is adjusted by FTOS if the number of routes for

the mask exceeds the initial allocation.