Distance - Dell Force10 Z9000 Reference Manual

Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related show ip ospf asbr
Commands

distance

Define an administrative distance for particular routes to a specific IP address.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-
list-name] command.
Parameters
weight
ip-address
mask
access-list-name
Defaults 110
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– displays the VLAN configuration.
Specify an administrative distance. The range is 1 to 255. The default
is 110.
(OPTIONAL) Enter a router ID in the dotted decimal format. If you
enter a router ID, you must include the mask for that router address.
(OPTIONAL) Enter a mask in dotted decimal format or /n format.
(OPTIONAL) Enter the name of an IP standard access list, up to 140
characters.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1047