Neighbor Distribute-List - Dell Force10 Z9000 Reference Manual

route-map
name
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0

neighbor distribute-list

Distribute BGP information via an established prefix list.
E-Series
Syntax neighbor [ipv6-address | peer-group-name] distribute-list
prefix-list-name [in | out]
To delete a neighbor distribution list, use the no neighbor [ipv6-address | peer-
group-name] distribute-list prefix-list-name [in | out] command.
Parameters
ipv6-address
peer-group-name
prefix-list-name
in
out
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0
Usage Other BGP filtering commands include the neighbor filter-list and neighbor
Information route-map commands.
Related
Commands
map-
(OPTIONAL) Enter the keywords route-map followed by the name
of a configured route map.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Enter the name of the peer group.
Enter the name of an established prefix list. If you do not configure
the prefix list, the default is permit (to allow all routes).
Enter the keyword in to distribute only inbound traffic.
Enter the keyword out to distribute only outbound traffic.
Introduced
• neighbor filter-list – assigns a AS-PATH list to a neighbor or peer group.
• neighbor route-map – assigns a route map to a neighbor or peer group.
521