Tagged - Dell Force10 Z9000 Reference Manual

Q: U - Untagged, T - Tagged
FTOS(conf-if-vl-222)#
Example
(OpenFlow
*
instance)
O
O
O
Related
vlan-stack compatible
Commands
interface vlan

tagged

Add a Layer 2 interface to a VLAN as a tagged interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax tagged interface
To remove a tagged interface from a VLAN, use the no tagged interface command.
Parameters
interface
Defaults All interfaces in Layer 2 mode are untagged.
Command Modes INTERFACE VLAN
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
946
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description
222 Inactive
NUM Status
1 Inactive
3 Inactive
6 Inactive
8 Inactive
12 Inactive
– enables the Stackable VLAN feature on the selected VLAN.
– configures a VLAN.
Enter the following keywords and slot/port or number information:
•
•
•
•
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Q Ports
U Gi 1/22
Description
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
Q Ports
O Te 0/10