Dell Force10 Z9000 Reference Manual page 1124

outbound ah sas
inbound esp sas
outbound esp sas
Interface: TenGigabitEthernet 0/1
Link Local address: fe80::201:e8ff:fe40:4d11
IPSecv6 policy name: OSPFv3-1-600
inbound ah sas
outbound ah sas
inbound esp sas
outbound esp sas
show crypto ipsec sa ipv6 Command Fields
Field
Interface
Link local address
IPSecv6 policy name
inbound/outbound ah
inbound/outbound esp
spi
transform
in use settings
replay detection support
STATUS
1124
spi : 500 (0x1f4)
transform : ah-md5-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
spi : 600 (0x258)
transform : esp-des esp-sha1-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
spi : 600 (0x258)
transform : esp-des esp-sha1-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
Description
IPv6 interface
IPv6 address of interface
Name of the IPsec security policy applied to the interface.
Authentication policy applied to inbound or outbound
traffic.
Encryption policy applied to inbound or outbound traffic.
Security policy index number used to identify the policy.
Security algorithm that is used to provide authentication,
integrity, and confidentiality.
Transform that the SA uses (only transport mode is
supported).
Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
ACTIVE: The authentication or encryption policy is
enabled on the interface.