Dell Force10 Z9000 Reference Manual page 1077

Usage The following describes the show ip ospf database asbr-summary command
Information shown in the Example below.
Field
LS Age
Options
LS Type
Link State ID
Advertising Router
Checksum
Length
Network Mask
TOS
Metric
Example
FTOS#show ip ospf 100 database asbr-summary
LS age: 1437
Options: (No TOS-capability, No DC, E)
LS type: Summary Asbr
Link State ID: 103.1.50.1
Advertising Router: 1.1.1.10
LS Seq Number: 0x8000000f
Checksum: 0x8221
Length: 28
Network Mask: /0
LS age: 473
Options: (No TOS-capability, No DC, E)
LS type: Summary Asbr
Link State ID: 104.1.50.1
Advertising Router: 1.1.1.10
LS Seq Number: 0x80000010
Checksum: 0x4198
Length: 28
--More--
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The following
options can be found in this item:
• TOS-capability or No TOS-capability is displayed depending
on whether the router can support Type of Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand circuits.
• E or No E is displayed on whether the originating router can
accept AS External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the advertising router's ID.
Displays the Fletcher checksum of the an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the Type of Service (TOS) options. Option 0 is the only
option.
Displays the LSA metric.
OSPF Router with ID (1.1.1.10) (Process ID 100)
Summary Asbr (Area 0.0.0.0)
TOS: 0 Metric: 2
1077