Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage
You must enable the multiple spanning tree protocol prior to using this command.
Information
Example
FTOS#show spanning-tree mst configuration
MST region name: CustomerSvc
Revision: 2
MSTI VID
FTOS#
show spanning-tree msti
View the multiple spanning tree instance.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show spanning-tree msti [instance-number [brief]] [guard]
Parameters
instance-number
brief
guard
Command Modes
Command History
Version 8.3.11.1
Version 8.4.2.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
1000
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
10 101-105
(Optional) Enter the multiple spanning tree instance number. The
range is 0 to 63.
(Optional) Enter the keyword brief to view a synopsis of the MST
instance.
(Optional) Enter the keyword guard to display the type of guard
enabled on an MSTP interface and the current port state.
•
EXEC
•
EXEC Privilege
Introduced on the Z9000.
Support for the optional keyword guard was added on the C-Series,
S-Series, and E-Series TeraScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.