Neighbor Bfd Disable - Dell Force10 Z9000 Reference Manual

Related
bfd neighbor
Commands

neighbor bfd disable

group.
show bfd neighbors
interface.
neighbor bfd disable
Explicitly disable a BFD session with a BGP neighbor or a BGP peer group.
E-Series ExaScale, Z-Series, S4810
Syntax neighbor {ip-address | peer-group-name} bfd disable
Parameters
ip-address
peer-group-name
Defaults none
Command Modes ROUTER BGP
Command History
Version 9.0.0.0
Version 8.3.8.0
Version 8.4.1.3
Usage
When you explicitly disable a BGP neighbor for a BFD session with the neighbor bfd
Information
disable command:
When you remove the disabled state of a BFD for BGP session with a specified neighbor by
entering the no neighbor bfd disable command, the BGP link with the neighbor
returns to normal operation and uses the BFD session parameters globally configured with the
bfd neighbor command or configured for the peer group to which the neighbor belongs.
Related
bfd neighbor
Commands
• The neighbor only inherits the global timer values configured with the bfd
neighbor command: interval, min_rx, and multiplier.
– enables BFD sessions with all neighbors discovered by Layer 3 protocols.
– explicitly disables a BFD session with a BGP neighbor or a BGP peer
– displays the BFD neighbor information on all interfaces or a specified
Enter the IP address of the BGP neighbor that you want to explicitly
disable for BFD sessions in dotted decimal format (A.B.C.D).
Enter the name of the peer group that you want to explicitly disable
for BFD sessions.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
• The neighbor does not inherit the global BFD disable values configured with the bfd
neighbor command or configured for the peer group to which the neighbor belongs.
• The neighbor only inherits the global timer values configured with the bfd
neighbor command: interval, min_rx, and multiplier.
– explicitly enables a BFD session with a BGP neighbor or a BGP peer group.
323