Dell Force10 Z9000 Reference Manual page 815

longer-prefixes
summary
Command Modes
Command History
Version 8.3.11.1
Version 7.7.1.0
Version 7.6.1.0
Usage The following describes the show ip fib stack-unit command shown in the Example
Information
below.
Field
Destination
Gateway
First-Hop
Mac-Addr
Port
VId
EC
Example
FTOS#show ip fib stack-unit 0
Destination
------------------------------------------------------
10.10.10.10/32 Direct, Nu 0
Port
-------------
BLK HOLE 0 0
FTOS>
Related clear ip fib stack-unit
Commands
(OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
(OPTIONAL) Enter the keyword summary to view the total number of
prefixes in the FIB.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Added support for up to seven stack members.
Introduced on the S-Series.
Description
Lists the destination IP address.
Displays either the word "direct" and an interface for a directly
connected route or the remote IP address to be used to forward the
traffic.
Displays the first hop IP address.
Displays the MAC address.
Displays the egress-port information.
Displays the VLAN ID. If no VLAN is assigned, zero (0) is listed.
Displays the number of ECMP paths.
Gateway
VId EC
– Clear FIB entries on a specified stack-unit.
First-Hop Mac-Addr
0.0.0.0 00:00:00:00:00:00
815