Dell Force10 Z9000 Reference Manual page 913

Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
Example (Port-
FTOS#show lacp 1
Channel-Number)
Port-channel 1 admin up, oper up, mode lacp
Actor
Partner System ID:Priority 32768, Address 0001.e801.45a5
Key 1
A-Active LACP, B-Passive LACP, C-Short Timeout, D-Long Timeout
E-Aggregatable Link, F-Individual Link, G-IN_SYNC, H-
OUT_OF_SYNC
I-Collection enabled, J-Collection disabled, K-Distribution
enabled L-Distribution disabled,
M-Partner Defaulted, N-Partner Non-defaulted, O-Receiver is in
expired state,
P-Receiver is not in expired state
Port Gi 10/6 is enabled, LACP is enabled and mode is lacp
FTOS#
Example (Sys-id)
FTOS#show lacp 1 sys-id
Actor
Partner
FTOS#
Example
FTOS#show lacp 1 counters
(Counter)
----------------------------------------------------
Port
-----------------------------------------------------
Gi 10/6
FTOS#
Related
clear lacp counters
Commands
show interfaces port-channel
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
System ID:Priority 32768, Address 0001.e800.a12b
Actor Admin Key 1, Oper Key 1, Partner Oper
LACP LAG 1 is an aggregatable link
Actor Admin: State ACEHJLMP Key 1
Oper: State ACEGIKNP Key 1
Partner Admin: State BDFHJLMP Key 0
Oper: State BCEGIKNP Key 1
System ID: Priority 32768, Address 0001.e800.a12b
System ID: Priority 32768, Address 0001.e801.45a5
LACP PDU
Xmit Recv
200 200
– clears the LACP counters.
Marker PDU Unknown
Xmit Recv Pkts Rx
0 0 0
– displays information on configured Port Channel groups.
Priority 128
Priority 128
Priority 0
Priority 128
Illegal
Pkts Rx
0
913