Dell Force10 Z9000 Reference Manual page 643

control-vlan
id
Defaults none
Command Modes CONFIGURATION (conf-frrp)
Command History
Version 8.3.11.1
Version 8.2.1.0
Version 7.4.1.0
Usage This command causes the Ring Manager to take ownership of these two ports after the
Information configuration is validated by the IFM. Ownership is relinquished for a port only when the
interface does not play a part in any control VLAN, that is, the interface does not belong to any
ring.
Related show frrp
Commands
Fast Ethernet
interface:
1-Gigabit
Ethernet
interface:
Port Channel
interface:
SONET interface:
10-Gigabit
Ethernet
interface:
40-Gigabit
Ethernet
interface:
vlan-
Enter the keyword control-vlan followed by the VLAN ID. Range:
1 to 4094.
Introduced on the Z9000.
Introduced on the C-Series.
Introduced.
– displays the Resilient Ring Protocol configuration information.
enter the keyword FastEthernet
followed by the slot/port information
enter the keywordGigabitEthernet
followed by the slot/port information
enter the keywordport-channel
followed by a number:
• C-Series and S-Series Range: 1-128
• E-Series Range: 1 to 255 for
TeraScale and 1 to 512 for ExaScale
enter the keyword sonet followed by the
slot/port information
enter the keyword
TenGigabitEthernet followed by the
slot/port information
enter the keyword fortyGigE followed by
the slot/port information
643