Show Fip-Snooping Sessions - Dell Force10 Z9000 Reference Manual

Parameters
fcf-mac-address
Command Modes
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage The following describes the show fip-snooping fcf command shown in the Example
Information
below.
Field
FCF MAC
FCF Interface
VLAN
FC-MAP
ENode Interface
FKA_ADV_PERIOD
No of ENodes
FC-ID
Example
FTOS# show fip-snooping fcf
FCF MAC
Enodes
------- ------------- ---- ------ -------------- -------------
54:7f:ee:37:34:40 Po 22
2

show fip-snooping sessions

Display information on FIP-snooped sessions on all VLANs or a specified VLAN, including the ENode interface and MAC
address, the FCF interface and MAC address, VLAN ID, FCoE MAC address and FCoE session ID number (FC-ID),
worldwide node name (WWNN) and the worldwide port name (WWPN).
S4810 and MXL Switch
Syntax show fip-snooping sessions [interface vlan vlan-id]
Parameters
vlan-id
Enter the MAC address of the FCF to be displayed.
• EXEC
• EXEC Privilege
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Description
MAC address of the FCF.
Slot/port number of the interface to which the FCF is connected.
VLAN ID number the session uses.
FC-Map value the FCF advertises.
Slot/ number of the interface connected to the ENode.
Time (in milliseconds) during which FIP keep-alive advertisements
transmit.
Number of ENodes connected to the FCF.
Fibre Channel session ID the FCF assigns.
FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of
Enter the vlan-id of the specified VLAN to be displayed.
100 0e:fc:00 4000
631